PocketWizard FlexTT5 Transceiver Radio Slave for Nikon i-TTL Flash System

Details

Features:

• Compatible with FCC Compliant Items Only
• Combination Transmitter/Receiver
• High Speed Sync up to 1/8000th sec
• On-Camera Hot Shoe
• Triggers Flash or Camera
• 32 Channels, Multi-Zone
• Standard Triggering with Most Cameras
• USB Upgradeable

The PocketWizard FlexTT5 Transceiver Radio Slave is part of an ultra-versatile radio slave system, and is dedicated specifically to the Nikon i-TTL flash control system. It simply slides directly into the camera’s hot shoe, and there are no special settings to make or modes to call up. Use the camera, on-camera flash, or flash commander controls for flash compensation, zone and ratio control. It supports single or multiple dedicated flash units.

The FlexTT5 is the ideal addition to any Nikon i-TTL flash system. Since this system works on digital radio technology, it can support i-TTL operation around corners, out-of-sight, or in bright sunlight.

The FlexTT5 is a “Transceiver”, meaning it can be used either as a transmitter placed into the camera’s hot shoe, in combination with another FlexTT5 unit on the flash end, or as a receiver, with a MiniTT1 transmitter-only unit placed on the camera’s hot shoe.

• This item is FCC compliant and can only be used with corresponding USA FCC compliant models. Using this item outside of the United States may be illegal. B&H is not responsible for any fines, fees, or penalties that may come from inappropriate spectrum usage.

Compatibility

Cameras
D4, D3x, D3s, D3, D2x, D800, D800e, D700, D600, D300, D300s, D200 D90, D80, D40x, D40, D7000, D5100, D5000, D3200, D3100, D3000
Nikon Speedlights as Remotes:
SB-400, SB-600, SB-700, SB-800, SB-900, SB-910
Nikon On-Camera Master Flashes:
SB-700 (GN ratio mode not supported), SB-800, SB-900, SB-910, SU-800

2 Channel Settings + Learn Mode

Each setting can be programmed to support up to 20 ControlTL channels for TTL photography, or 32 standard channels for manual flash photography. The FlexTT5 Transceiver also has a three-zone selector switch, which integrates with Nikon zones and ratios. The Learn Mode allows the unit to detect the channel used by any other unit in the area.

HyperSync & High-Speed Sync Technology

Supports flash sync speeds of up to 1/500th sec. High-Speed Sync auto syncs the flash system with the camera’s shutter speed setting, up to 1/8000th.

Built-In Hot Shoe

Features a hot shoe on the top, so that you can still mount a flash unit directly onto the camera. This allows you to combine your remote flash with the on-camera flash, or use the on-camera flash for additional i-TTL control only.

Camera/Flash Ports

The FlexTT5 Transceiver has two plug-in ports for use with remote Nikon i-TTL cameras, or other non-TTL flash units. Camera remote triggering also requires the use of a camera-specific “motor cord”.

Remote Camera Triggering/Relay Mode

Can be used to trigger a camera remotely. Requires use of a camera-specific “motor cord”. Auto Relay Mode allows you to trigger a remote camera in sync with a remote flash.

Low-Profile Design

The FlexTT5 lies flat to stay out of the way and uses a flip-up antenna for additional range when needed.

Configurable and Upgradeable

The FlexTT5 features a mini-USB port, which makes it upgradeable and “future-proof” for continuous improvements and compatibility upgrades. The included PocketWizard Utility software allows you to select custom settings through the USB connection, and to set it to use specific channels used by other Pocket Wizard units.